Event Details

  • Stud bolt supplier is to provide sellers with a large number of stud bolts. Stud bolts are also called stud screws or studs. The fixed link function used to connect the machine. The stud bolts have threads on both ends, and the middle screw is thick or thin.
    Generally used in mining machinery, bridges, automobiles, motorcycles, boiler steel structures, crane towers, large-span steel structures and large buildings, etc. Bolts specifically refer to screws with larger diameters, and can also have no heads, such as stud bolts. Generally, it is not called a "stud bolt" but a "double stud". The most commonly used form of double-ended studs has threads at both ends and a polished rod in the middle. The most typical use: foundation bolts, or places similar to foundation bolts, thick connections, when ordinary bolts cannot be achieved.
    Main uses: 1. It is used in the main body of large-scale equipment, which needs to install accessories, such as sight glass, mechanical seal seat, reduction frame, etc. At this time, stud bolts are used, one end is screwed into the main body, and the other end is fitted with a nut after the attachment is installed. Since the attachment is often disassembled, the thread will be worn or damaged.
    It is very convenient to use stud replacement. 2. When the thickness of the connecting body is very large and the bolt length is very long, stud bolts will be used. 3. It is used to connect thick plates and places where it is inconvenient to use hexagonal bolts, such as concrete roof truss, roof beam suspension monorail beam suspension, etc.
    The stud bolt supplier must inspect the newly replaced stud bolts and other newly replaced accessories during each repair. The focus of the inspection is on the head and guide part of the stud bolt, and every thread must be strictly inspected. Whether there are cracks or dents in each part, and check the tooth shape of the stud to see if there is any change. Whether there is any abnormality in the pitch, if there is any abnormality, it must not be used again. The torque wrench should be used when installing the connecting rod cover.
  • 12/8/20 at 3:00 AM -
    12/15/20 at 3:00 AM
  • Where
    宁波 Map
  • Host
    yongding
  • Led by
  • Category
  • RSVPs
    • 1 attending
    • 0 maybe attending
    • 0 not attending
    • 0 awaiting reply

Updates

Nothing has been posted here yet - be the first!